VARIAIR SV 130/1

Side channel blowers, single stage

The VARIAIR SV 130/1 is a turbo dynamic pump with a VARIAIR frequency inverter that offers high performance with 100% free of oil and contact during operation. These side channel blowers are low-maintenance, highly efficient, and require only minimal maintenance.

VARIAIR frequency inverter
Exact volume flow due to variable speed operation

Specifications

Volume flow	285 m³/h
Pressure relative	+405 mbar
Inverter Power	4.0 kW
Frequency	20…100 Frequency
Noise Level	70 dB(A)
Weight	30 kg with motor & inverter

Features

VARIAIR frequency inverter
Non-contact compression
Compact design
Inlet & discharge silencers
Sealed bearings eliminate greasing
Rubber foot or pedestal mount for versatile installation

Benefits

Exact volume flow due to variable speed operation
Low operating and exhaust temperatures
Quiet Operation

Markets

Printing and Paper Industry

Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.
Energy

Becker vacuum pumps and blowers follow the trend of new technologies and are an important, efficient component of stationary fuel cells, and battery production, amongst other benefits.
Plastics Industry

From the production of new plastic components to the resource-friendly recycling of PET – vacuum pumps, vacuum systems and compressors from Becker are involved in the process.
Environmental Industry

Vacuum pumps and compressors from Becker are the preferred solution for sparging, wastewater treatment, and aeration.
General Mechanical Engineering

Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.
Construction Industry

Perfect for turning air into power, our vacuum pumps and compressors are built to withstand the high demands of working on construction sites.

Applications

Pneumatic Conveying

Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.
Blowing & Injecting

Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.